FFM - FUNCTIONS
With FFM everything is under your control all the time, the system is always connected and transfers everything you want to know about your fleet in real time.
Do you want to know which machines of your fleet are working? If the intervention is carried out as planned? How much energy each machine is using?
FFM can answer to all the questions.
DETAILED INTERVENTION ANALYSIS
Would you like to know how many sq.m have been cleaned? If the interventions respect the timetable? If the fleet is properly used?
FFM provides a graphical overview of all the aspects of the cleaning activity, which clearly shows how the job is performed in each site. It’s possible to check which working mode is used, and for how long, by each machine or the entire fleet.
In this way it is possible to check if the planning is respected and if the machines are properly used or not. As an example, you can be aware if a machine remains switched on but unused for a long time or if the cleaning intervention time exceeds the schedule. It is possible to analyse the performances, to know how many sq.m have been cleaned, how many interventions have been carried out and the time they took.
- Clear and easy-to-read graphical overview
- Detailed analysis customized according to any need: per job site, intervention, machine or fleet
- Easy comparison between the service provided and the scheduled one
- Highlights need for educational sessions or trainings
- Optimization of the workload and fleet management
- Enhancement of the service efficiency
- Awareness of the real fleet performance
- Easy identification of underused machines
- More transparency on the fleet use.
- Easy evaluation of each machine usage
- No loss of information
TELEMETRY
Is the machine working as it should? Do you feel a decrease in the performances?
The telemetry enables you to easily understand what’s going on. FFM shows you in real time simple and clear charts about the machine status and help you find out if any anomaly occurred. It’s possible to check how each motor and each internal device is working in order to identify any possible anomaly, what caused it, and easily plan a corrective action.
- Prevention of downtime caused by misuse
- Remote control of the condition of each machine components and motors
- Immediate identification of any functioning errors
- Avoids machine setbacks
- Highlights training and educational needs
IMPACT ALERTS
An accident occurred and you want to know more about it? Would you like to know how it happened and what part have been damaged without an on-site inspection?
With the data freezing function it’s possible to check the machine status before and after the impact. In this way it will be easier to identify the failure entity and what caused it. The machine itself will send the information to the appointed service center thus reducing the reparation time.
- Advanced diagnostics about impacts and related damages
- Real time warning of the type of damage
- Reduction of service time and cost
- Fast restoration of full operation
- Highlights misuse cases
- Available as retrofit solution for existing machines
DIGITAL BATTERY MANAGEMENT
The batteries don’t last as they should? Did you replace the battery pack too early? Would you like to know the real battery lifespan of your fleet?
FFM can show you the battery status, how they’re used and recharged. A chart shows the percentage of opportune recharges versus the complete ones. The opportune recharges reduce drastically the battery lifespan. Keeping under control the opportune recharges allows you to identify any improper use in order to correct it, thus avoiding premature battery replacement and reducing related cost and environmental impact.
- Prevention of premature battery replacement cost
- Improvement and extension of the battery lifespan
- Reduction of the damages due to inaccurate recharges and maintenance
- Analysis of the use in real time and afterwards
- Check of the proper machine setup
- Identification of misuse and behaviors to be improved
- Evaluation of the energy consumption
- Available as retrofit solution for existing machines
ELECTRONIC KEY
Would you like to have a better control over the fleet use? Would you like to restrict the access to the machines according to the users skills?
FFM allows to customize the keys, enabling them to operate just some specific models or the whole fleet, thus preventing their use by unauthorized or unskilled personnel
- Key identification via RFID transponder
- Prevents unauthorized use
- Lets you customize the access to the machines
- Customizable settings per key
- Reduction of damages caused by improper use
- More conscious use of the machine
- Available as retrofit solution for existing machines
ENVIRONMENTAL IMPACT ANALYSIS
Are you wondering what could be the environmental impact of each cleaning intervention? Would you like to know exactly the amount of resources consumed?
FFM can calculate the environmental impact per each machine or the whole job site. The charts show the quantity of energy spent during each intervention and the one needed to recharge the batteries. Moreover, they provide information about the solution used and the CO₂ produced every day or per intervention. All the information can be summarized into a report, which will help you to identify what actions could be taken to make the activity more sustainable.
- Awareness of the environmental impact for each machine or job site
- Comparison between the estimated environmental impact and the real results
- Evaluation and analysis of the real energy consumptions
- Evaluation and analysis of the cleaning solution consumption
- Easy identification of possible improvement actions
- Opportunity of emission offsetting
- Improvement of the environmental policy
