BMg Disinfector scrubs, dries, and sanitizes in one step
MECHANIZE SANITIZATION WITH THE DISINFECTOR VERSION OF BMG
In addition to carrying out the usual cleaning activity, the BMg scrubbing machine in the Disinfector version is able to sanitize environments by spraying a sanitizing solution through special nozzles located at the rear of the machine.
In addition to carrying out the usual cleaning activity, the BMg scrubbing machine in the Disinfector version is able to sanitize environments by spraying a sanitizing solution through special nozzles located at the rear of the machine.
THE ELECTROSTATIC TECHNOLOGY
The spraying action uses the electrostatic technology. The electrostatic charge causes the particles of the liquid to repel each other and thus to maintain a constant distance between them, which results in an even distribution. In addition, the charged particles are attracted by the surfaces on which they are directed, which guarantees a 360-degree coverage on each side of an object, without leaving out gaps.
The spraying action uses the electrostatic technology. The electrostatic charge causes the particles of the liquid to repel each other and thus to maintain a constant distance between them, which results in an even distribution. In addition, the charged particles are attracted by the surfaces on which they are directed, which guarantees a 360-degree coverage on each side of an object, without leaving out gaps.
THE SOLUTION IS SPRAYED UP TO 3 METERS
While BMg carries out its usual cleaning activity, the sanitizing liquid is sprayed by groups of nozzles positioned above the tank, and then transported up to 3 metres away in distance and height from the force of two turbines, and by another group of nozzles positioned at the rear base of the machine, intended only for the floor.
While BMg carries out its usual cleaning activity, the sanitizing liquid is sprayed by groups of nozzles positioned above the tank, and then transported up to 3 metres away in distance and height from the force of two turbines, and by another group of nozzles positioned at the rear base of the machine, intended only for the floor.
DIRECTIONAL NOZZLES
The spray can be directed according to the needs of the site, by rotating the turbines 180° from top to bottom and 180° from right to left.
The spray can be directed according to the needs of the site, by rotating the turbines 180° from top to bottom and 180° from right to left.
SEPARATE NOZZLE OPERATION: ON THE RIGHT OR LEFT SIDE
You can choose to activate the spray only on one side or the other, according to the requirements of the specific environment you are sanitizing.
You can choose to activate the spray only on one side or the other, according to the requirements of the specific environment you are sanitizing.
SEPARATE NOZZLE OPERATION: UPPER AND LOWER
The upper and lower nozzles are also independent, allowing you to adapt the activity according to the structure of the environment and avoid wasting solution.
The upper and lower nozzles are also independent, allowing you to adapt the activity according to the structure of the environment and avoid wasting solution.
3 ACTIONS IN ONE
Between the aisles of a warehouse or a supermarket, the scrubber dryer cleans the floor, scrubbing and drying it, while the lower nozzles spray the sanitizing liquid on the cleaned surface. In this way the floor at both ends of the aisle, is sanitized. Then, you can move on to the central part: in this case the upper nozzles are also activated, so that the turbines carry the sanitizing solution up to the shelves.
Between the aisles of a warehouse or a supermarket, the scrubber dryer cleans the floor, scrubbing and drying it, while the lower nozzles spray the sanitizing liquid on the cleaned surface. In this way the floor at both ends of the aisle, is sanitized. Then, you can move on to the central part: in this case the upper nozzles are also activated, so that the turbines carry the sanitizing solution up to the shelves.
SEPARATE NOZZLE OPERATION: UPPER AND LOWER
The upper and lower nozzles are also independent, allowing you to adapt the activity according to the structure of the environment and avoid wasting solution.
The upper and lower nozzles are also independent, allowing you to adapt the activity according to the structure of the environment and avoid wasting solution.
TRACK THE SANITIZATION OF ENVIRONMENTS
You can track sanitization interventions exactly like cleaning interventions, thanks to the FFM - Fimap Fleet Management system. The FFM system collects information and returns reports with which you can prove the sanitization interventions carried out.
You can track sanitization interventions exactly like cleaning interventions, thanks to the FFM - Fimap Fleet Management system. The FFM system collects information and returns reports with which you can prove the sanitization interventions carried out.