Pure power to your commands

POWER MODE, FOR THE MAXIMUM POWER WHEN NEEDED
With any active working program, the Power Mode function enables the scrubbing power to be increased for a short time interval, and when this has passed, the machine returns to the previous configuration. This is useful when during the normal cleaning routine, the machine comes across small areas of dirt meet that need a more intense scrubbing action.
REAR VIEW CAMERA
Helps the operator to maneuver safely in cluttered places like production sites, warehouses and laboratories. Can be activated to monitor cleaning performance at any time, without turning around.
 

BRAKE ASSISTANT SYSTEM
When reversing, in addition to the acoustic signal, a braking system is also activated, which progressively decreases speed in the presence of an obstacle, for greater safety in complicated maneuvers, uphill reversing and parking along walls.

ZONE PROGRAMS, FOR ALL THE PERFORMANCE YOU'LL EVER NEED
The zone programs make the job even easier. The operator simply has to select the zone to be cleaned, and all the cleaning settings associated with it will be activated. Different work environments can be saved, configuring the right combination of water, detergent and pressure for each one. In this way, you can be sure that the cleaning is carried out with the best settings and without wasting resources.
VACUUM WAND
Equipped with a powerful 3-stage vacuum motor, the wand enables the collection of dirt deposited in areas difficult to be reached with the machine. It's always within easy reach, stored in a compartment on the machine.
DRIES EVEN IN NARROW BENDS
The V-shaped side splash guards keep the water inside the brush area and in line with the path of the squeegee, which can then collect it completely. This enables excellent drying quality to be achieved, without leaving traces of water and with no need to pass over an area twice, even when the turning circle is limited.
FLR - FIMAP LONG RANGE
The BMg scrubbing machine can be fitted with the FLR water recycling system that filters the detergent solution and makes it available again. FLR increases the working autonomy and allows more sq.m. to be scrubbed while using fewer resources, reducing detergent solution consumption by up to 66%* per cleaning operation and increasing productivity by up to 70%.

*Saving calculated on a triple recycling cycle