MxL keeps an eye on the environment while it works
LED HEADLIGHTS
The LED headlights consume much less energy than conventional headlights - up to 80% less - and offer a longer life cycle.
They illuminate with a white light similar to natural daylight.
The LED headlights consume much less energy than conventional headlights - up to 80% less - and offer a longer life cycle.
They illuminate with a white light similar to natural daylight.
ECO MODE
Eco Mode is a quiet work configuration with low consumption. For frequent or maintenance cleaning, i.e. when enhanced scrubbing power isn't required, it guarantees sustainable operations by reducing the use of water, detergent and energy.
START&STOP
When the machine stops temporarily, the brush motors, vacuum*, traction and water flow will turn off automatically, reducing consumption, costs and emissions. All the functions are reactivated automatically by pressing the dead man's lever.
Eco Mode is a quiet work configuration with low consumption. For frequent or maintenance cleaning, i.e. when enhanced scrubbing power isn't required, it guarantees sustainable operations by reducing the use of water, detergent and energy.
START&STOP
When the machine stops temporarily, the brush motors, vacuum*, traction and water flow will turn off automatically, reducing consumption, costs and emissions. All the functions are reactivated automatically by pressing the dead man's lever.
*The vacuum does not stop automatically in the E versions. In the basic and Pro versions, it stops with the manual lifting of the squeegee.
FLR - FIMAP LONG RANGE
Upon request, MxL can be fitted with the FLR water recycling system that filters the detergent solution collected, making it available again.
FLR increases the working autonomy and allows more sq.m. to be scrubbed while using fewer resources, reducing detergent solution consumption by up to 66%* per cleaning operation and increasing productivity by up to 70%.
FSS - FIMAP SOLUTION SAVER
Used to separately adjust water and detergent flow. In this way, only the necessary quantity of water and the right percentage of detergent are used according to the type of dirt, avoiding waste or excessive quantities difficult to remove.
FWF - FIMAP WATER FLOW
Guarantees a uniform flow of solution to the brushes during the supply phase, even with reduced flow rates. The cleaning results will therefore always be uniform across the entire working width, on the first pass.
FES - FIMAP ENERGY SAVER
Industrialization, new technologies, the use of new-born materials and the solutions developed thanks to advanced designing methods, allowed to rationalize the components number and lower the machine weight, increasing as a consequence performance and autonomy and reducing consumption up to 35%.
FNC - FIMAP NOISE CANCELING
The application of this technology allows to reduce the sound pressure level while the machine is working, reducing also operator fatigue and the environmental impact where the machine is operating. Thanks to the low noise level, it is possible to use the machine in sensitive environments and during day shifts eliminating the expensive night shifts.
Upon request, MxL can be fitted with the FLR water recycling system that filters the detergent solution collected, making it available again.
FLR increases the working autonomy and allows more sq.m. to be scrubbed while using fewer resources, reducing detergent solution consumption by up to 66%* per cleaning operation and increasing productivity by up to 70%.
FSS - FIMAP SOLUTION SAVER
Used to separately adjust water and detergent flow. In this way, only the necessary quantity of water and the right percentage of detergent are used according to the type of dirt, avoiding waste or excessive quantities difficult to remove.
FWF - FIMAP WATER FLOW
Guarantees a uniform flow of solution to the brushes during the supply phase, even with reduced flow rates. The cleaning results will therefore always be uniform across the entire working width, on the first pass.
FES - FIMAP ENERGY SAVER
Industrialization, new technologies, the use of new-born materials and the solutions developed thanks to advanced designing methods, allowed to rationalize the components number and lower the machine weight, increasing as a consequence performance and autonomy and reducing consumption up to 35%.
FNC - FIMAP NOISE CANCELING
The application of this technology allows to reduce the sound pressure level while the machine is working, reducing also operator fatigue and the environmental impact where the machine is operating. Thanks to the low noise level, it is possible to use the machine in sensitive environments and during day shifts eliminating the expensive night shifts.