MxL scrubbing machine: power in an extra large size

The new MxL walk-behind scrubbing machine has been designed in line with the cleaning style represented by the new-generation Fimap machines; that is, advanced machines that provide help, collect data, communicate and support the activity, to improve the efficiency of cleaning operations.

Control performance to optimise results
The MxL does much more than clean; it also enables the operator to check the cleaning results. Greater control enables better performance whilst reducing consumption, saving resources, slashing operation times and lowering costs. This can all be achieved via a simple digital interface which is as user-friendly as any smartphone or tablet, and can be used to memorise specific cleaning programs for the various areas to be cleaned, so these can be found every time they are needed, without the risk of using more resources than necessary. The water, detergent and pressure on the brushes can be adjusted to different levels for each area memorised, so that with each new use, the operator simply needs to select the area to be cleaned, and the cleaning starts immediately with the correct setting. In addition, the machine offers two basic configurations, Eco mode and Power mode: the first uses all the functions at the minimum possible levels to save water and detergent, while the second boosts these to the maximum, to deliver more scrubbing power only when this is required.
It is possible to remotely check that the consumption is in line with the levels set, through the FFM - Fimap Fleet Management telemetry system, which through the My.Machine app, allows the most important information to be checked via smartphone at any time, including sq.m. cleaned, environmental impact, location and status of the batteries. With this real, up-to-date information to hand, an objective assessment can be made of the steps that need to be taken to improve performance and make the entire process more efficient, both in economic and environmental terms.
 
Transform passive time into active time
MxL places everything required in order to optimise the work in the hands of the operator, ensuring that there is no need to stop, so that the cleaning operation can be performed safely and without any uncertainty. The dirt that accumulates in corners and which cannot be reached with the machine can be vacuumed using the special vacuum wand, with no need to interrupt the cleaning operation to look for additional equipment. At the end of the shift, MxL provides the instructions necessary for performing the routine maintenance operations correctly; these are essential to ensuring consistent performance. The parts to be cleaned are yellow in colour, and in case of doubt, the operator can view specific video tutorials directly on the MxL display, which demonstrate how to perform routine and extraordinary maintenance, preventing uncertainty and wasted time as well as removing the risk of carrying out the operations incorrectly. MxL almost becomes an assistant, providing the user with all the tools necessary when these are required and delivering help and training during the cleaning operations. If there is no tap nearby at the end of the shift, the operator can use the spray gun to rinse the tanks and complete the maintenance, without having to move or even risk not completing these operations.
 
Equipped with all the upgrades that distinguish the #thisisfimap generation of scrubbing machines, the MxL offers a concrete opportunity to implement a rational approach to cleaning management. Time, resources and costs are the key factors in every operation, and having tools that allow these to be monitored and thus used in a more conscious manner is the best strategy for making the most of these. As such, MxL becomes a fundamental part of a cleaning system that respects the environment, increases productivity and reduces the cost per sq.m. cleaned.

Experience MxL
Numero Verde

FIMAP spa certified with
TÜV AUSTRIA ITALIA:
ISO 9001:2015, ISO 14001:2015, ISO 45001:2018
SGS:
SA 8000:2014, ISO 14067:2018
BUREAU VERITAS ITALIA:
ReMade in Italy, ISO 14064-1:2018

Fimap S.p.A.
Via Invalidi del Lavoro, 1
37059 S.Maria di Zevio - Verona - ITALY
Tel. +39 045 6060411