03.05.2011
MMx, Mx and SMx Restyling 2011
After 4 years, MMx, Mx and SMx range has been updated with few but significant changes that improved the overall quality and simplified even more daily maintenance operations.
All these models are equipped with a new squeegee that matches the lightness of the structure to corrosion resistance and the possibility to use the rubber blades on the four edges. The rubber can be easily removed without any tools even with the passing of time: this particular type of squeegee is more resistant to wear, to water and chemical contact and it is easy to be cleaned. Therefore even after some time and after many working hours the rubber retainer is simple to be removed as it were new.
Besides, the support revision allowed to adopt a squeegee particularly small in dimensions (68cm) even on the MMx 50-52 model, achieving as a consequence a machine extremely agile, able to pass through very narrow passages and in cluttered spaces and even more user-friendly, in spite of the large working width.
On the MMx and Mx versions the handlebar that holds the electrical system has been revised, to protect it from water seepage and ensure at the same time easier access for maintenance operations. On both models the suction hose has been modified and therefore it can be cleaned easily.
In addition, also the SMx model is now equipped with a practical control to set the needed speed: a real cruise control that allows to reduce the stress level of the operator that, thanks to this device, can give more attention to cleaning operations.
All the MMx, Mx and SMx range are always equipped with Fimap sustainable technologies, that reduce wastes and environmental impact, adjust water, detergent (FSS) and energy consumptions (FES), and assure a very low acoustic pressure level (FNC).
All these models are equipped with a new squeegee that matches the lightness of the structure to corrosion resistance and the possibility to use the rubber blades on the four edges. The rubber can be easily removed without any tools even with the passing of time: this particular type of squeegee is more resistant to wear, to water and chemical contact and it is easy to be cleaned. Therefore even after some time and after many working hours the rubber retainer is simple to be removed as it were new.
Besides, the support revision allowed to adopt a squeegee particularly small in dimensions (68cm) even on the MMx 50-52 model, achieving as a consequence a machine extremely agile, able to pass through very narrow passages and in cluttered spaces and even more user-friendly, in spite of the large working width.
On the MMx and Mx versions the handlebar that holds the electrical system has been revised, to protect it from water seepage and ensure at the same time easier access for maintenance operations. On both models the suction hose has been modified and therefore it can be cleaned easily.
In addition, also the SMx model is now equipped with a practical control to set the needed speed: a real cruise control that allows to reduce the stress level of the operator that, thanks to this device, can give more attention to cleaning operations.
All the MMx, Mx and SMx range are always equipped with Fimap sustainable technologies, that reduce wastes and environmental impact, adjust water, detergent (FSS) and energy consumptions (FES), and assure a very low acoustic pressure level (FNC).
